Click here to buy Underfloor Heating Kits Online
Underfloor Heating Multi Room Kit
Our range of Underfloor heating Kits come using 2, 3, 4, 5, 6, 7, 8, 9, 10, 11 & 12 Port Manifold Underfloor Heating thermostatic blending valve with circulating pump are ideally suited to the temperature control of individual under floor heated rooms (range from 20m² to 240²).
Application
Used in systems which are predominately heated by radiators (normal flow and return temperatures 80/70°C) and where underfloor heating represents a small part of the system, this pack is ideal for example a single room, conservatory or extension.
Ideal when easy DIY installation and operation is required. Set includes wall enclosure box, cover and valve (return temperature limiter) and sensor element to control the return temperature.
Multi Room Underfloor Heating Kit Components - 2 Port Set includes:
- 2 port kit provides temperature control of underfloor heating circuit using thermostatic blending valve with circulating pump. The heated floor area should not be greater than 40m².
- 22mm Underfloor Heating blending valve.
- Underfloor Heating 15-60 circulating pump.
- Flow and return temperature sensor and gauge.
- 2 x automatic air vents.
- 2 x filling and drain points.
- 2 x 1" 1/4 turn manifold isolating valves.
- 2 x manifold port electrothermic actuators.
- 25m of edge insulation.
- 2m of pipe conduit.
- 400 staples (to fix pipe to floor insulation).
- 200m x 16mm PEXb barrier pipe ~ enough for enough for 40m² @ 200mm pipe centres or,
- 30m² @ 150mm pipe centres or,
- 20m² @ 100mm pipe centres.
- brass pump and compression 22mm pipe unions and instructions.
- Please note for clarity not all the parts supplied with this kit are shown in photo.
Typical Underfloor Heating Multi Room Kit
Multi Room Underfloor Heating Kit Components - 12 Port Set includes:
- Underfloor Heating 12 port kit provides temperature control of underfloor heating circuit using thermostatic blending valve with circulating pump. The heated floor area should not be greater than 240m².
- Set includes: Underfloor Heating 22mm Blending valve.
- Underfloor Heating 15-60 circulating pump.
- Flow and return temperature sensor and gauge.
- 2 x automatic air vents.
- 2 filling and drain points.
- 2 x 1" 1/4 turn manifold isolating valves.
- 12 x manifold port electrothermic actuators.
- 125m of edge insulation.
- 12m of pipe conduit.
- 2200 staples (to fix pipe to floor insulation).
- 1200m x 16mm PEXb barrier pipe ~ enough for 240m2 @ 200mm pipe centres or,
- 180m² @ 150mm pipe centres or,
- 120m² @ 100mm pipe centres,
- Brass pump and compression 22mm pipe unions and instructions.
- Please note for clarity not all the parts supplied with this kit are shown in photo.
For installation questions or help with choosing the Single Room Underfloor Heating Kit for your application please send us your e-mail on sales@underfloorheating1.co.uk or call our technical help line on 01302 727182.
Email: sales@underfloorheating1.co.uk
Web: www.underfloorheating1.co.uk
|
